- Home
- ยป
- Our Product Range
- »
- Fiberglass Orthopedic Casting Tape
Fiberglass Orthopedic Casting Tape
Orthopedic Synthetic Cast Tape
Minimum Order Quantity: 100 Roll
Product Brochure
Color | Any |
Tape Size | 15 cm X 360 cm W x L |
Packaging Size | 10 Rolls in 1 Box |
Material | Fiberglass |
Usage | Personal, Hospital, Clinical, Clinical, Hospital |
Brand | G.S. Medilinks |
Packaging Type | Roll |
Our products are ISO, CE, FDA approved. TheOrthopedic Synthetic Cast Tape is made of knitted fiberglass fabric and water-activated polyurethane resin. It uses environmental friendly materials, and mainly used for the external fixation of fracture and common orthopedics. This product has many advantages comparing with plaster bandage. It is the upgraded and replaced product of the traditional plaster bandage. Our Fiberglass Orthopedic Casting Tape has strength and it is easier to be cut than Polyester casting tape. Cast consists of knitted fiberglass fabric & is impregnated with a water-activated polyurethane resin.
Advantages:
- Light Weight
- High strength
- Fast solidification
- Excellent X-ray radiolucency
- Good air-permeability
- Comfort
- Convenient operation compared with traditional plaster bandage
Application instruction:
- Apply 1-2 layers stockinet over the affected part and additional padding can be used
- Wear surgical gloves
- Before opening the bag, choose the proper size
- Immerse the cast in room temperature water (20-25OC) for 4-6 seconds and squeeze it 2-3 times. The warmer the water is, the shorter the setting time is
- Wrap the cast spirally, overlapping one-half or two-thirds width of the cast on the previous layer. Take care to maintain proper tension and avoid wrapping too tight. The strength can be determined by the number of layers wrapped. Just 3-4 layers should be wrapped on the non-weight-bearing position and 5-6 layers should be wrapped on the weight bearing position
- If more rolls of cast are used at one time, make sure the good adhesiveness of each cast
- Smooth and rub the surface to achieve good adhesiveness between layers. The cast start solidifying in 3-5 minutes after immersion in the water. So operation should be finished in 3-5 minutes. Patients can’t move the affected part in the 10 minutes before sufficient cure
- The cast may be windowed, trimmed or removed with electric plaster saw
Precautions:
- Surgical gloves should be worn while using the cast to avoid that the polyurethane resin adheres to unprotected skin and clothing
- Avoid punching and damaging the bag, as it will cause the cast to solidify prematurely in the bag. Open only one bag at a time and use it immediately, because room humidity can cause the cast to solidify
- The cast should be stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30OC and humidity should be less than Rh60%
- It should be operated by a doctor or a medical professional
- The date of production is marked on the bag. The period of validity of products three years
Size |
Usage |
2’’ |
Children hands, fingers and toes |
3’’ |
Children wrists, ankles, arms and legs |
4’’ |
Children legs and ankles, adults arms and legs |
5’’ |
Adult arms and legs |
6’’ |
Adult arms and legs |
Additional Information:
- Item Code: AC636HFC
- Production Capacity: 10000
- Delivery Time: 4 DAYS
- Packaging Details: 10 ROLLS ONE BOX 10 BOXES IN ONE CARTON
Fiberglass Orthopedic Casting Tape
Minimum Order Quantity: 100 Roll
Product Brochure
Material | Fiberglass |
Packaging Size | 10 ROLLS |
Tape Size | 10 CM X 360 CM |
Usage/Application | Hospital |
Usage | Personal, Hospital, Clinical |
Color | Yellow, Pink, Red, Green Etc, Blue |
Brand | ALTO CAST |
Packaging Type | Roll |
Our products are ISO, CE, FDA approved. The Fiberglass Orthopedic Casting Tape is made of knitted fiberglass fabric and water-activated polyurethane resin. It uses environmental friendly materials, and mainly used for the external fixation of fracture and common orthopedics. This product has many advantages comparing with plaster bandage. It is the upgraded and replaced product of the traditional plaster bandage. Our Fiberglass Orthopedic Casting Tape has strength and it is easier to be cut than Polyester casting tape. Cast consists of knitted fiberglass fabric & is impregnated with a water-activated polyurethane resin.
Advantages:
- Light Weight
- High strength
- Fast solidification
- Excellent X-ray radiolucency
- Good air-permeability
- Comfort
- Convenient operation compared with traditional plaster bandage
Application instruction:
- Apply 1-2 layers stockinet over the affected part and additional padding can be used
- Wear surgical gloves
- Before opening the bag, choose the proper size
- Immerse the cast in room temperature water (20-25OC) for 4-6 seconds and squeeze it 2-3 times. The warmer the water is, the shorter the setting time is
- Wrap the cast spirally, overlapping one-half or two-thirds width of the cast on the previous layer. Take care to maintain proper tension and avoid wrapping too tight. The strength can be determined by the number of layers wrapped. Just 3-4 layers should be wrapped on the non-weight-bearing position and 5-6 layers should be wrapped on the weight bearing position
- If more rolls of cast are used at one time, make sure the good adhesiveness of each cast
- Smooth and rub the surface to achieve good adhesiveness between layers. The cast start solidifying in 3-5 minutes after immersion in the water. So operation should be finished in 3-5 minutes. Patients can’t move the affected part in the 10 minutes before sufficient cure
- The cast may be windowed, trimmed or removed with electric plaster saw
Precautions:
- Surgical gloves should be worn while using the cast to avoid that the polyurethane resin adheres to unprotected skin and clothing
- Avoid punching and damaging the bag, as it will cause the cast to solidify prematurely in the bag. Open only one bag at a time and use it immediately, because room humidity can cause the cast to solidify
- The cast should be stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30OC and humidity should be less than Rh60%
- It should be operated by a doctor or a medical professional
- The date of production is marked on the bag. The period of validity of products three years
Other Details:
SIZE |
USAGE |
2’’ |
Children hands, fingers and toes |
3’’ |
Children wrists, ankles, arms and legs |
4’’ |
Children legs and ankles, adults arms and legs |
5’’ |
Adult arms and legs |
6’’ |
Adult arms and legs |
Additional Information:
- Production Capacity: 10000
- Delivery Time: 4-5 DAYS
- Packaging Details: 10 ROLLS ONE BOX 10 BOXES IN ONE CARTON
Ortho Cast Padding
Product Brochure
Color | White |
Brand | G.S. Medilinks' |
Material | Cotton |
Packaging Type | Roll |
Bandage Size | 15 cm x 300 cm W x L |
Usage/Application | Hospital, Clinical, Personal |
Our firm is engaged in offering a vast range of Ortho Cast Padding, which is basically orthopaedic rolls widely used in applications related to orthopaedic surgery. The offered casting is made of soft fibre, these are known for preventing skin maceration, absorb exudates and sweat. Also acts as a cushion between bones and POP during the bone breakage so as to lead to rapid recovery.
Features:
- Easy to use
- Very soft
- Extremely comfortable
- Good absorbent of liquid
- Allows skin to breathe
Known For:
- Preventing skin maceration
- Absorbing sweat
Available Size:r
- 10 cm x 3 mtr
- 15 cm x 3 mtr
Orthopaedic Fiberglass Casting Tape
Minimum Order Quantity: 100 Roll
Product Brochure
Material | Fiberglass |
Packaging Size | BOX OF 10 ROLLS, CARTON OF 10 BOXES |
Tape Size | 7.5 CM X 3.6 METER |
Color | Any |
Usage/Application | Hospital |
Brand | ALTO CAST |
ALTOCAST is a synthetic orthopaedic casting tape made of knitted fiberglass or polyester substrate impregnated with water-activating polyurethane resin. The fabric is extensible in all directions. which makes it very comfortable in use.
Exposure to any moisture will cause the tape to become rigid. the setting time is approximately 4 minutes and it takes 20 minutes for full weight bearing.
Smooth Finish
high quality knitted substrate and special resin formula provide smooth surface and strong layer adhesion.
Superb and Distingushed Color
Excellent Moulding
Superior multi-direction stretch gives excellent moulding on curved area.
Precautions:
- Surgical gloves should be worn while using the cast to avoid that the polyurethane resin adheres to unprotected skin and clothing
- Avoid punching and damaging the bag, as it will cause the cast to solidify prematurely in the bag. Open only one bag at a time and use it immediately, because room humidity can cause the cast to solidify
- The cast should be stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30OC and humidity should be less than Rh60%
- It should be operated by a doctor or a medical professional
- The date of production is marked on the bag. The period of validity of products three years
Other Details:
SIZE | USAGE |
2’’ | Children hands, fingers and toes |
3’’ | Children wrists, ankles, arms and legs |
4’’ | Children legs and ankles, adults arms and legs |
5’’ | Adult arms and legs |
6’’ | Adult arms and legs |
Additional Information:
- Item Code: AC336HFC
- Production Capacity: 10000
- Delivery Time: 5-7 DAYS
- Packaging Details: 10 ROLLS ONE BOX 10 BOXES IN ONE CARTON
Fiberglass Synthetic Casting Tape
Minimum Order Quantity: 100 Piece
Product Brochure
Tape Size | 10 CM X 360 CM |
Material | Fiberglass |
Packaging Size | 10 Rolls in a box and 10 boxes in a carton |
Usage/Application | Hospital |
Color | Any |
Packaging Type | 10 rolls |
Finishing | NA |
Weight | 200 GRMS |
Model Name/Number | AC436HFC |
Brand | ALTO CAST |
ALTOCAST is a synthetic orthopaedic casting tape made of knitted fiberglass or polyester substrate impregnated with water-activating polyurethane resin. The fabric is extensible in all directions. which makes it very comfortable in use.
Exposure to any moisture will cause the tape to become rigid. the setting time is approximately 4 minutes and it takes 20 minutes for full weight bearing.
Smooth Finish
high quality knitted substrate and special resin formula provide smooth surface and strong layer adhesion.
Superb and Distingushed Color
Excellent Moulding
Superior multi-direction stretch gives excellent moulding on curved area.
Precautions:
- Surgical gloves should be worn while using the cast to avoid that the polyurethane resin adheres to unprotected skin and clothing
- Avoid punching and damaging the bag, as it will cause the cast to solidify prematurely in the bag. Open only one bag at a time and use it immediately, because room humidity can cause the cast to solidify
- The cast should be stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30OC and humidity should be less than Rh60%
- It should be operated by a doctor or a medical professional
- The date of production is marked on the bag. The period of validity of products three years
Additional Information:
- Item Code: AC436HFC
- Production Capacity: 10000
- Delivery Time: 4-5 DAYS
- Packaging Details: 10 ROLLS ONE BOX 10 BOXES IN ONE CARTON
Orthopaedic Fiberglass Casting Tapes
Minimum Order Quantity: 10 Roll
Product Brochure
Material | Fiberglass |
Backing Material | NA |
Brand | ALTO CAST |
Usage/Feature | HOSPITAL |
Packaging Size | 100 ROLLS |
Tape Size | 3" |
Usage/Application | Hospital |
MOQ | 100 |
Tape Type | Adhesive |
Total Thickness | NA |
Elongation | NA |
Adhesive Type | FIBERGLASS |
Adhesive Strength | STRONG |
7.5x360cm Orthopedic Casting Tape providing stretchability which comprises a knitted fibrous substrate impregnated with a water-curable synthetic resin wherein the substrate consists of synthetic organic fiber stretch yarn solely, in part stretch yarn and in part natural fibers, in part stretch yarn and in part artificial fibers or in part stretch yarn and in part mixtures of natural and artificial fibers. 7.5x360cm Orthopedic Casting Tape is made from fiberglass material used to replace plaster of paris bandage with the outstanding advantages.
SPECIFICATION
Country of Origin |
Made in India |
Brand |
Alto cast |
Usage |
Personal, Hospital, Clinical |
Color |
Black, Yellow, Green Red Etc. |
Tape Size |
7.5 cm X 360 cm Wx L |
Material |
Fiberglass |
Fiberglass Orthopedic Casting Tape
Minimum Order Quantity: 100 Roll
Product Brochure
Material | Fiberglass |
Brand | ALTO CAST |
Packaging Size | 10 ROLLS |
Tape Size | 5.0 X 360 cm W x L |
Color | Any |
Usage | Hospital, Clinical, Personal |
Packaging Type | Roll |
The Fiberglass Orthopedic Casting Tape is made of knitted fiberglass fabric and water-activated polyurethane resin. It uses environmental friendly materials, and mainly used for the external fixation of fracture and common orthopedics. This product has many advantages comparing with plaster bandage. It is the upgraded and replaced product of the traditional plaster bandage. Our Fiberglass Orthopedic Casting Tape has strength and it is easier to be cut than Polyester casting tape. Cast consists of knitted fiberglass fabric & is impregnated with a water-activated polyurethane resin. Our products are ISO, CE, FDA approved.
Advantages:
- Light Weight
- High strength
- Fast solidification
- Excellent X-ray radiolucency
- Good air-permeability
- Comfort
- Convenient operation compared with traditional plaster bandage
Application instruction:
- Apply 1-2 layers stockinet over the affected part and additional padding can be used
- Wear surgical gloves
- Before opening the bag, choose the proper size
- Immerse the cast in room temperature water (20-25OC) for 4-6 seconds and squeeze it 2-3 times. The warmer the water is, the shorter the setting time is
- Wrap the cast spirally, overlapping one-half or two-thirds width of the cast on the previous layer. Take care to maintain proper tension and avoid wrapping too tight. The strength can be determined by the number of layers wrapped. Just 3-4 layers should be wrapped on the non-weight-bearing position and 5-6 layers should be wrapped on the weight bearing position
- If more rolls of cast are used at one time, make sure the good adhesiveness of each cast
- Smooth and rub the surface to achieve good adhesiveness between layers. The cast start solidifying in 3-5 minutes after immersion in the water. So operation should be finished in 3-5 minutes. Patients can’t move the affected part in the 10 minutes before sufficient cure
- The cast may be windowed, trimmed or removed with electric plaster saw
Precautions:
- Surgical gloves should be worn while using the cast to avoid that the polyurethane resin adheres to unprotected skin and clothing
- Avoid punching and damaging the bag, as it will cause the cast to solidify prematurely in the bag. Open only one bag at a time and use it immediately, because room humidity can cause the cast to solidify
- The cast should be stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30OC and humidity should be less than Rh60%
- It should be operated by a doctor or a medical professional
- The date of production is marked on the bag. The period of validity of products three years
SIZE |
USAGE |
2’’ |
Children hands, fingers and toes |
3’’ |
Children wrists, ankles, arms and legs |
4’’ |
Children legs and ankles, adults arms and legs |
5’’ |
Adult arms and legs |
6’’ |
Adult arms and legs |
Additional Information:
- Item Code: AC236HFC
- Production Capacity: 10000
- Delivery Time: 45 DAYS
- Packaging Details: 10 ROLLS ONE BOX 10 BOXES IN ONE CARTON
Synthetic Cast Tape
Minimum Order Quantity: 10 Roll
Product Brochure
Material | Fiberglass |
Our products are ISO, CE, FDA approved. The Fiberglass Synthetic Casting Tape is made of knitted fiberglass fabric and water-activated polyurethane resin. It uses environmental friendly materials, and mainly used for the external fixation of fracture and common orthopedics. This product has many advantages comparing with plaster bandage. It is the upgraded and replaced product of the traditional plaster bandage. Our Fiberglass Orthopedic Casting Tape has strength and it is easier to be cut than Polyester casting tape. Cast consists of knitted fiberglass fabric & is impregnated with a water-activated polyurethane resin.
Advantages:
- Light Weight
- High strength
- Fast solidification
- Excellent X-ray radiolucency
- Good air-permeability
- Comfort
- Convenient operation compared with traditional plaster bandage
Application instruction:
- Apply 1-2 layers stockinet over the affected part and additional padding can be used
- Wear surgical gloves
- Before opening the bag, choose the proper size
- Immerse the cast in room temperature water (20-25OC) for 4-6 seconds and squeeze it 2-3 times. The warmer the water is, the shorter the setting time is
- Wrap the cast spirally, overlapping one-half or two-thirds width of the cast on the previous layer. Take care to maintain proper tension and avoid wrapping too tight. The strength can be determined by the number of layers wrapped. Just 3-4 layers should be wrapped on the non-weight-bearing position and 5-6 layers should be wrapped on the weight bearing position
- If more rolls of cast are used at one time, make sure the good adhesiveness of each cast
- Smooth and rub the surface to achieve good adhesiveness between layers. The cast start solidifying in 3-5 minutes after immersion in the water. So operation should be finished in 3-5 minutes. Patients can’t move the affected part in the 10 minutes before sufficient cure
- The cast may be windowed, trimmed or removed with electric plaster saw
Precautions:
- Surgical gloves should be worn while using the cast to avoid that the polyurethane resin adheres to unprotected skin and clothing
- Avoid punching and damaging the bag, as it will cause the cast to solidify prematurely in the bag. Open only one bag at a time and use it immediately, because room humidity can cause the cast to solidify
- The cast should be stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30OC and humidity should be less than Rh60%
- It should be operated by a doctor or a medical professional
- The date of production is marked on the bag. The period of validity of products three years
Other Details:
SIZE |
USAGE |
2’’ |
Children hands, fingers and toes |
3’’ |
Children wrists, ankles, arms and legs |
4’’ |
Children legs and ankles, adults arms and legs |
5’’ |
Adult arms and legs |
6’’ |
Adult arms and legs |
Additional Information:
- Item Code: AC136HFC
- Production Capacity: 10000
- Delivery Time: 4-5 days
- Packaging Details: 10 ROLLS IN A BOX AND 100 ROLLS IN CARTON